Medical

The 100 series miniature toggle switches offer UL ratings, right angle and SMT options, with a PCB mount.

The 100A Series miniature, sealed toggle switches protect from the elements at an IP67 rating and come with multiple options, including SPST or SPDT and right angle termination.

The 200 Series subminiature toggle switch is PC board mountable, comes with threaded or non-threaded bushing options, features SPST or SPDT circuits, and is rated for up to 3 amps.

The 200A Series subminiature, sealed toggle switch is protected from dust and moisture at an IP67 rating, has both SPST or SPDT circuit options, and is rated to handle up to 3 amps with [cURus] approval.

The 200B Series subminiature toggle switch is sealed to an IP67 rating. It is a surface mount switch available with a single-pole circuit and either a metal or plastic actuator.

The 200R Series miniature toggle switch features multiple mounting and termination options, including surface mounting, and single or double pole circuits.

The 200U Series ultraminiature, sealed toggle switch with right or vertical PCB mount are extremely tiny and feature an IP67 rating for protection against dust and moisture.

Ultraminiature rocker switch for PC board mounting with multiple mounting options, a lever actuator option, 2-pole circuits, and gold contacts.

Sealed to IP67 ratings, these slide switches offer protection from water, dust and the elements. Up to 3 actuator positions and available in single or double pole circuit configurations.

800U Series ultraminiature, sealed pushbutton switch is sealed to IP67 ratings and has multiple termination options.

The CS Series illuminated, anti-vandal switch provides capacitive switch technology, also known as a touch sensor, and can perform momentary or latching functions. It is meant for panel cutouts sized 19mm or 22mm.

The FS5700 Series foot-actuated pushbutton switch is available with SPDT, DPDT, or 3PDT circuits for performing momentary or alternate action functions. It has high actuation force and PC board mount or panel mount designs.

These piano DIP switches come with splayed, through hole PC board pin or SMT, gull wing termination. Gold contacts and 2, 4, 6, 8, or 10 actuator positions. Tube or tape and reel packaging.

The KAD Series is a low-profile DIP switch offering 4, 5, 8, 9 or 10 positions with an extended or recessed actuator and an optional top tape seal for the recessed actuator. Delivered in tube or tape and reel packaging.

These slide DIP switches offer between 1 and 12 positions, with vertical or right angle PC board pin termination. A top seal is available, as are recessed or extended actuators.

These rotary switches offer many different models including SP, DP, 3P and 4P. Some models come with stops, others no stops. Up to 12 positions. PCB pin or solder lug termination options and many different actuator lengths.

The KS1100 Series pushbutton switch offers keyboard functionality. With a 10mA, 12VDC rating, it is a single pole, single throw (SPST) switch with momentary function and a tall actuator height of 15.2mm.

The LB22 Series is a pushbutton available with or without illumination and sealed at an IP65 ingress protection rating. Single- or double-pole functions and latching or momentary options are available, as are multiple colors and illumination voltage.

This long life tact switch offers right angle SMT designs, low profile SMT, dual action and more, all rated up to 5 million operating life cycles.

The LP11 Series illuminated pushbutton switch offers multiple cap and LED color options, momentary or latching functions, and comes with or without a tactile response.

This illuminated pushbutton switch offers custom marking options, multiple LED colors, and different cap sizes.

Pushbutton switch with full LED illumination and multiple color choices. Single pole, through hole switch with custom graphics available for the caps.

Right Angle, SMT pushbutton switch with multiple illumination options. SPDT momentary function.

Multiple bezel and button designs to choose from with this illuminated pushbutton switch. Right angle and vertical through hole mount design with full LED illumination options. Two poles, momentary and maintained functions.

The MR1000 Series is a recessed magnetic or reed type switch which comes in a two-piece design. One piece contains the magnet and the other piece contains the reed switch.

Choose between a single pole, single throw (SPST) momentary pushbutton switch or a single pole, double throw (SPDT), double action switch, which actuates mid-travel, and then again at full travel.

The PB66 Series pushbutton switch is rated IP66 for dust and moisture protection, features a 50,000-cycle electrical life expectancy, and comes illuminated or non-illuminated.

Our PMV6 Series anti-vandal pushbutton switches come with your choice of multiple function options and cap colors. This IP67-rated switch offers a 10,000-cycle electrical life, an operating temperature range of -20°C to 65°C, and fits a panel cutout sized 16mm.

The PV0 Series anti-vandal switch is rated IP67 for protection against dust and moisture and is illuminated, with multiple color options. It fits a 12mm panel cutout with a maximum depth of 6mm.

The PV1 Series water resistant, sealed, anti-vandal switches feature long life and custom laser engraved marking options. It has a panel cutout size of 19mm (8mm max. depth) and is sealed to IP65 ratings.

The PV10 Series illuminated anti-vandal switch is rated IP65 for dust and moisture protection and has a mechanical life of a million cycles. It fits a panel cutout 40mm in diameter with a maximum depth of 5mm.

Vandal resistant and water resistant to IP65, this anti-vandal switch has a long life expectancy, and a panel cutout size of 16mm (6mm max. depth). It offers an Off-(On) configuration and your choice of domed, flat, or high actuator options.

These long life anti-vandal switches have solder lug or screw terminal options, and are 1-pole, momentary switches with an IP65 rating for protection against dust and moisture. They fit in a panel cutout sized 12mm with a maximum depth of 5mm.

These long life anti-vandal switches have an IP65 rating for protection against dust and moisture, dot and ring illumination options, and have solder lug or wire lead terminal options. They are meant for a panel cutout 16mm in size with a maximum depth of 10mm.

These pushbutton switches have a 22mm diameter panel cutout, dot and ring illumination options, 1-pole, double break function and are IP65 rated.

These switches are meant for a panel cutout 25mm in diameter, feature dot and ring illumination, 1 or 2 poles, maintained and momentary, double-break functions, and are IP65 rated.

The PV9 Series anti-vandal switch offers a 28mm diameter cutout size with an IP66 rating for dust and moisture protection, and dot or ring illumination.

The PVA3 Series anti-vandal switch provides ring illumination with multiple LED color options. It is IP65 rated and performs momentary or latching functions. This switch is meant for a panel cutout sized 16mm in diameter with a maximum depth of 8mm.

The PVA6 Series illuminated anti-vandal switch offers a long life expectancy, dust and water resistance to an IP67 rating, and ring or power symbol illumination. It fits a panel cutout sized 16mm in diameter with a maximum depth of 6-8mm.

The PVK4 Series is an anti-vandal switch rated IP65 for dust and moisture protection with a keylock option rated IP40. Multiple illumination colors and voltages are also available.

The PVP Series anti-vandal switch socket offers quick, efficient termination. It is available with solder lugs or can be direct wired. The PVP socket with solder lugs is for anti-vandal series PV3, PV4, PV7. Direct wired sockets are available for anti-vandal series PV3, PV4, PV7, PV8, PV9, and PV10.

This switch offers a 19mm diameter panel cutout, dot and ring illumination options, crisp tactile response, momentary functionality with an IP65 rating.

The PZ Series is an anti-vandal, panel mount, piezo switch with momentary pulse functionality and 50 million cycles of electrical life. The PZ series is offered as non-illuminated or ring pattern illumination with LED RGB.

The RA8 Series power rocker switch has a high electrical rating of up to 16 amps. The RA8 offers full or signal light illumination with multiple LED lens colors and an optional cap for protection from dust and moisture at an IP54 rating. It fits a panel cutout 13mm by 19mm in size.

The RB1 Series power rocker switch has a high electrical rating of up to 20 amps and features multiple terminal, actuator, and illumination options, plus an optional cap for dust and moisture protection at an IP54 rating. It fits a panel cutout sized 11mm by 30mm.

The RB2 Series illuminated, power rocker switch is electrically rated for 20 amps and has an optional cap for dust and water protection at an IP54 rating. Dot, full, signal light, or non-illumination options are available for this switch meant for a 22mm by 30mm panel cutout.

The RB3 Series rocker switch has five configurations rated IP67 for dust and moisture protection. All configurations offer dual LED illumination in multiple colors, marking options, and multiple terminal and actuator options.

The RBW2 Series illuminated rocker switch is sealed to IP66 ratings without requiring a rubber boot. UL approved to 1/3 HP and [cURus] approved for up to 16 amps. Fits panel cutout sized 22mm by 30mm.

The RD1 Series compact, power rocker switch is a small rocker switch with high electrical ratings. It is ideal for applications with limited space. Rated for up to 16A and 1/3HP, this switch fits a panel cutout 6.8mm by 19.2mm in size.

This ultra slim, IP67 rated rotary DIP switch comes with either 10 or 16 actuator positions. There are three actuator options with right angle or vertical PCB pin or surface mounting designs.

This IP67 rated rotary DIP switch offers 4, 6, 8, 10, or 16 actuator positions and right angle or vertical PCB mounting designs as well as through hole, surface mount termination.

This panel mount switch is an SPST, momentary pushbutton with a long life expectancy and is sealed at an IP65 rating. It\'s an illuminated pushbutton with multiple LED and cap color options.

The RP8400 Series switches are square, momentary pushbuttons sealed to an IP65 rating with a die cast housing and nylon actuator. The illuminated pushbutton comes in many colors.

This pushbutton switch has a 13.6mm diameter panel cutout and is an SPST momentary (500,000 life cycles) switch. It is IP65 sealed, and has a nylon housing & actuator.

The RP8600 Series square, sealed pushbutton switches are protected from moisture at an IP67 rating and have a mechanical life expectancy of 100,000 cycles.

This RR3130 Series round power rocker switch is meant for panel mount cutouts sized 18.2mm in diameter and has a light, ergonomic feel, which is great for designing your applications.

The RSC Series illuminated, power rocker switch has a bi-color actuator and four sizes to cover many popular cutouts. High electric current capacity of up to 20 amps and 1/4 HP rating.

The RT1105 series tactile switch is a top actuated, reverse through-hole mounted tact switch. It provides up to 100,000 cycle life expectancy in a 6.80mm x 6.80mm footprint. This switch series features a soft silicon actuator 4.40mm high and provides multiple gram force options identified by different color actuators.

The RT3301 Series is a top-actuated, reverse surface mount tact switch 6mm by 6mm in size, featuring a long life expectancy of up to 100,000 cycles.

The RVW Series high current rocker switch features an internal dust and water protection seal rated IP54. Glossy finish and multiple marking options and switch functions are available for this switch that fits a panel cutout sized 21mm by 36.8mm.

The SAV4 Series anti-vandal switch comes pre-mounted on a snap action switch, utilizing the LS snap action with a 15A electrical rating. It fits a panel cutout sized 19mm in diameter.

The SAV7 Series anti-vandal switch has an electrical rating of 15A, 125/250VAC and is protected from dust and moisture at an IP67 rating. It fits panel cutouts sized 22mm in diameter.

The ST2 Series power toggle switches have a heavy duty rating with agency approvals to handle up to 20 amps. Tab, screw, solder and wire lead terminal options are available.

The ST3 Series power toggle switch offers a heavy duty rating with agency approvals for handling up to 24 amps. It has tab, screw, solder, or wire lead terminal options.

The ST4 Series sealed toggle switches are rated IP68 for dust and moisture protection and offer single pole or double pole circuit functions with 2 or 3 actuator positions. Select from 10 different function options, three electrical rating options, and 17mm metal or 22mm plastic bat actuator.

The ST5 series toggle switch series can handle temperatures ranging from -10°C to 125°C. The ST5 offers a single pole or double pole circuit function with two or three positions and offers three electrical rating options.

The SV4 Series is made from stainless steel and is rated IP67 for dust and moisture protection. The switch also boasts a mechanical life of a million cycles and an electrical life of 200,000 cycles. It fits a round panel cutout 19mm in size.

The SV7 Series is a short body anti-vandal switch rated IP67 for protection against dust and moisture. It has a 22mm diameter panel cutout size. This illuminated switch is available with solder terminals or wire leads.

The SV8 Series is an IP67 rated, short body, illuminated anti-vandal switch. It is meant for a 25mm panel cutout, making it the largest of the SV Series switches.

The TD1150 is a thru hole PCB mounted detector switch. It is IP65 rated for dust and moisture protection and provides full travel around 2.5mm with the electrical make around .5mm’s. Actuation force to the electrical make is only 35 grams.

The TD1250 Series detector switches feature a 500,000-cycle mechanical life at minimum and are rated IP67 for dust and moisture protection. They come with mounting bosses and have three actuator options.

The TL1014 Series subminiature tactile switch is side mount actuated. It is a right angle, SMT tact switch, and it comes in tape and reel packaging for easy insertion into your design.

The TL1015 Series ultraminiature tact switch is top actuated for miniature, surface mount applications.

The TL1016 Series right angle tactile switches are just 3.5 x 3.55mm in size, have a life expectancy of up to 100,000 cycles, and feature multiple operation force options and a ground terminal option.

The TL1100 Series is a 12mm x 12mm tactile switch with vertical and right angle mounting designs, and silver or gold plated contacts.

The TL1105 and TLE1105 Series are 6mm x 6mm tactile switches come with a right angle option, many actuator lengths, and multiple operating forces.

The TL1107 Series is a 3.5mm x 6mm tact switch featuring straight, reverse, and side retention termination options. Silver plated contacts.

The TL1220 Series illuminated tact switch has multiple cap options, including custom graphics. Single or double LED color options are available. PCB mount design

The TL1240 Series illuminated tact switch offers multiple LED options, reliable dome technology, independent LED leads, multiple cap options and LED color matching upon request.

The TL1250 Series switch is an illuminated, right angle tact switch with a sharp, tactile response and through-hole termination. Single color LED options in blue, red, green and yellow are available.

The TL1260 Series through-hole tactile switches are illuminated and have a right angle termination. They are available in a variety of LED and cap colors.

The TL1265 Series tactile switch offers brilliant, LED illumination in a small package. With vertical termination and multiple cap options, this tact switch offers a 500,000 cycle life expectancy.

The TL1275 Series panel mount, tactile switches include 500mm long wire leads with connectors. This tact switch is 19mm diameter and provides a sharp tactile response and LED illumination options.

The TL2233 Series subminiature switch is a surface mountable (SMT), momentary contact push button with a DPDT contact arrangement and gull wing terminals that are wave solderable. The switch has a long electrical life of 10,000 cycles.

The TL2243 Series tactile switches are low profile, double stacked tact switches that can save space on the PC board. They have a sharp tactile feel.

The TL3145 Series long life, surface mountable (SMT) tactile switch has multiple actuator heights and an extremely long life expectancy of up to 3,000,000 cycles.

The TL3200 SMT, LED illuminated tactile switch offers single or dual LED illumination, with single or dual color options available. This tact switch is sub-miniature in size, measuring only 4.5mm x 6.8mm x 2mm.

The TL3210 is a miniature, LED illuminated, SMT tact switch with tactile tape and reel packaging.

The TL3215 Series tactile switch is ultraminiature in size and comes in five different LED colors. It also is low profile and surface mountable, so you have a small footprint and save space.

The TL3240 Series LED illuminated tactile switch is a surface mount (SMT) switch that offers LED illumination in blue, red, green and yellow. Cap options are offered but are ordered and shipped separately. Tactile tape & reel packaging.

The TL3253 Series dual LED illuminated tactile switch offers a right angle mount and multiple LED color options. There are two actuator heights to choose from and multiple cap options to as well, offering a long life at 500,000 life cycles.

The TL3265 Series is an LED illuminated, surface mountable tactile switch offering several LED color options. The TL3265 is 6.80mm x 7mm with a 12mm profile.

The TL3275 Series tact switch is surface mountable at a right angle, features multiple illumination options, including dual-LED, and has a life expectancy of up to 100,000 cycles.

The TL3300 Series SMT tactile switch offers a long life expectancy of 200,000 cycles, multiple actuator options, and multiple force options. Force options range from 160 grams to 520 grams. The size of the TL3300 series tactile switch is 12mm x 12mm.

The TL3301 Series is a 6mm x 6mm SMT tact switch. Designed for SMT applications, the TL3301 offers several actuator heights, multiple operating force, gold or silver plated contacts.

The TL3302 series tactile switches feature a 3.5mm x 6mm packaged design. This is an SMT tactile switch offering reliable dome contact technology and strong tactile feedback.

The TL3303 Series is a 6mm x 6mm tactile switch with 100, 160, or 260 gram force options. Surface mount design and silver plated contacts.

The TL3304 Series tactile switch features a life expectancy of up to 100,000 cycles and offers multiple actuator, actuation force, and termination options for surface mount applications.

This ultraminiature tact switch has surface mount termination, two operating forces to choose from (160gf and 260gf), and an operating lifecycle up to 500,000 cycles.

Subminiature tactile switch with multiple operating forces. SMT design and silver plated contacts.

The TL3315 Series tactile switches feature an ultra low profile (0.55mm) and are surface mountable, making it a great tact switch for applications that require a tight fit.

This SMT, right angle tactile switch has a low profile. There are two gram force options and this tact switch comes with silver contacts. It has a gull wing termination.

The TL3336 Series sealed tactile switch is a right angle surface mountable, side-actuated switch. It features robust PCB soldering pads for a secure connection.

The TL3340 Series SMT, subminiature tact switch features reliable tactile dome technology and a strong tactile force. This tactile switch is only 4mm x 3.3mm in size and has silver plated contacts. It is a right angle switch.

The TL3342 Series low profile, SMT tactile switch has two operating force options. Its low profile is a mere 1.50mm high.

The TL3360 Series is designed for right angle, SMT applications and offers multiple actuation heights and operating force options of 185gf or 260gf.

The TL3365 series tactile switch is surface mountable and ultraminiature. Its 4.2mm x 3.2mm in size and features SMT gull wing design.

The TL3701 series ultra miniature micro tact switch is a mere 3.0mm x 2.6mm x 0.65mm! This tactile switch features a 100,000 cycle life expectancy and two operating force options.

The TL3750 Series is used for the wearables market. So tiny you need a magnifying glass to see it!

The TL3780 series ultraminiature tact switch from E-Switch offers a very low profile, with dimensions of 2x3mm, making it great for applications where space is at a premium

This miniature right angle, SMT tactile switch offers an operating force of 180gf, gull wing termination and silver contacts for PC board edge mounting, and tactile tape and reel packaging.

The TL4100 Series tactile switch offers a unique, right angle board mount design, with a long life expectancy of 1,000,000 cycles and multiple force options, This switch is miniature in size.

The TL4105 Series right angle edge mounted tactile switch offers an ultraminiature design. These tactile switches sit on the edge of the PC board, offering a unique design opportunity. It has a 200,000 cycle life expectancy.

The TL4110 Series is a surface mountable tactile switch with a life expectancy of 300,000 cycles. This tact switch has an extremely low profile of 2.0mm x 2.8mm.

The TL4115 Series tactile switch has a right angle edge, surface mount design and provides a life expectancy of 600,000 cycles in a 4.50mm x 2.20mm x 2.60mm footprint. This tact switch series features a soft round actuator and provides 160gf or 220gf operating force options.

The TL52 series tactile switch is a thru hole switch that comes in radial packaging and is a sealed switch with IP67 rating.

The TL6100 Series tactile switch offers multiple actuator heights and a long operating life of up to one million cycles. These tactile switches are process sealed and offers the following operating force options: 130gf, 160gf, 300gf, or 500gf.

The TL6105 Series tactile switch has an earth ground terminal and offers a long operating life of up to one million cycles. These tactile switches come with multiple actuator styles and operating force options.

The TL6110 Series tact switch offers a long operating life of up to 1 million cycles and offers multiple actuator heights. This tact switch comes in a right angle design and is process sealed.

The TL6120 series tact switch offers a long operating life of up to 1 million cycles and offers multiple actuator heights. This surface mount switch is process sealed.

The TL6150 Series tactile switch is an SMT switch available with either gull wing or J-lead termination. This SPST momentary tactile switch is rated IP67 for protection against dust and moisture.

The TL6155 Series tactile switch is a sealed, right angle, surface mountable switch. It provides up to a 300,000 cycle life expectancy in a 6.40mm x 6.55mm footprint.

The TL6170 Series is a mid-sized, tactile switch rated IP67 for dust and moisture protection that can be surface mounted and comes with two tall actuator options.

The TL6200 Series tact switch offers a long operating life of 10 million cycles and is rated to IP67 standards for dust and moisture protection. This tact switch comes in both SMT (gull wing) and through-hole termination options, and offers multiple actuator lengths.

The TL6210 Series miniature, SMT tactile switch offers an IP67 rating for protection against dust and moisture and illumination options.

The TL6215 Series tactile switch offers some unique features: right angle mount, LED illumination, and IP67 sealed to protect from dust and moisture.

Sub-miniature illuminated thru-hole tact switch that is water washable, provides 350 gram actuation force and 100,000 life cycle rate.

The TL6300 Series PCB mount, high-temperature tactile switch offers a 10,000,000 cycle life expectancy.

The TL6400 Series tact switch is surface mountable and has an IP67 rating for protection against dust and moisture. It has a life expectancy of up to 50,000 cycles and comes in tape and reel packaging with two actuator and actuation force options.

The TL6700 Series is a sealed, SMT tactile switch. It features an improved seal design and protects against more aggressive wash processes.

The TL6800 Series tactile switches are surface mountable and sealed to an IP67 rating. They offer a long life of up to a million cycles and come with two different actuation force options.

The TL9210 Series surface mount tactile switch offers a long travel and a quiet tactile feel with low contact resistance.

With a 1,000,000 life cycle expectancy, the switch is environmentally friendly and contains no mercury. This tilt switch is triggered when it is tilted 45 degrees of the horizontal.

The ULV7 Series is a tamper resistant switch that is UL Listed and IP67 rated for dust and moisture protection. It fits a 22mm round panel cutout with a maximum depth of 10mm.

The ULV8 Series anti-vandal switch is UL certified and rated IP67 for dust and moisture protection. It fits a panel cutout 25mm in diameter with a maximum depth of 10mm.

The WB2 Series high current rocker switch has an internal dust and water protection seal rated IP55. It handles up to 20 amps and comes with 2-pole circuits for performing various functions. It fits a panel cutout sized 22mm by 30mm.

The WBL Series illuminated, right angle switches feature many LED color options and are available as maintained (latching) or momentary pushbuttons with either 2 or 4 pole circuits. An optional transparent cap is also available.

This snap action switch is sealed to an IP67 ingress protection rating for dust and moisture and offers multiple termination options including wire leads.

The WS1 Series is a panel mount, snap action switch sealed to an IP67 rating for dust and moisture protection with SPDT On-(On) function, multiple electrical ratings, pin plunger actuator, and solder lug or 162mm long wire lead termination.

The WS2 Series snap action switch is rated IP67 for dust and moisture protection, handles up to 2 amps, has a long life expectancy, and comes with multiple terminal options.