800 Series Sub-Miniature Pushbutton Switches

Sub-miniature pushbutton switches featuring a snap in panel mount option and butt contact design. sub-miniature pushbutton switches Pushbutton

The 800 series subminiature pushbutton switches have a snap-in panel mount option and a butt contact design. These tiny pushbutton switches offer a variety of termination options and work great in the telecommunications, networking, computers, performance audio, instrumentation and low power on/off design applications.

CERTIFICATIONS (click the logo below)

Other pushbutton switches
Other power rated switches
Other right angle switches

Step 1

Configure your part number by selecting from the columns below.

PART NUMBER:

Clear

Step 2

When your part number is complete, click to view additional options.

Additional Options

Most Common Parts

Series

800

Model No.

SP8

SPDT
On-(On)
SP9

SPST
Off-(On)

Bushing

B5

Flat-THD
See Chart
B6

Flat
NON-THD
See Chart
B7

Flat
NON-THD
See Chart
B8

Flat
NON-THD
See Chart
B9

Flat-THD
See Chart
B10

NON-THD
See Chart

Termination

M1

Solder Lug
M2

Vertical
P.C. Mount
M6

Horizontal
Rt. Angle
P.C. Mount
M61

Horizontal
Rt. Angle
P.C. Mount
w/Retention
Bracket
M7

Vertical
Rt. Angle
P.C. Mount
VS2

Vertical
P.C. Mount
w/Bracket

Contact Material

Q

Silver
R

Gold

Seal

E

Epoxy Sealed

Hardware

(None)
H

Hardware - to be used with threaded bushing options only

Cap

(None)
C1
C2

Cap Color

(None)
BLK

Black
WHT

White
RED

Red
GRN

Green

SPECIFICATIONS
RATINGS: 1A 250VAC
3A 120VAC or 28VDC
ELECTRICAL LIFE: 50,000 Cycles Typical
CONTACT RESISTANCE: 10mΩ Max. Typical at 2-4VDC
100mA For Both Silver and Gold Plated Contacts
INSULATION RESISTANCE: 1,000MΩ Min.
DIELECTRIC STRENGTH: 1,000V RMS at Sea Level
OPERATING FORCE: 200gf ± 50gf
OPERATING TEMP: -30°C to 85°C

MATERIALS
CASE: Diallyl Phthalate (DAP)
PLUNGER: Glass Filled Nylon or Glass Filled Polyester
BUSHING: Nickel Plated Brass
HOUSING: Stainless Steel
CONTACTS: Silver or Gold Plated Copper Alloy