Home Maintenance

Miniature rocker switches sealed to an IP67 rating and available in gold or silver contacts, with multiple termination options for PC board or panel mounting.

This subminiature, sealed rocker switch is IP67 rated and comes with many actuator and termination options with silver contacts power rated for up to 3 amps.

These miniature slide switches offer both Panel or PCB mount, many termination options, vertical or horizontal actuation, single or double pole, with 2 or 3 positions, gold or silver contacts, with epoxy sealed terminals.

These illuminated, touch sensor capacitive anti-vandal switches are sealed to IP68 and fit a 19mm or 22mm panel cutout, in a SPST latching or momentary function, and 50 million cycles electrical life.

These subminiature slide switches offer panel or PCB mounting, up to six-pole circuits and six actuator positions, and numerous package and actuator designs including right angle.

This surface mount right angle slide switch offers a SPDT circuit, with a 1.5mm travel, and a compact 2.6mm x 6.7mm package design with a 1.4mm profile height off the pcb.

This surface mount right angle slide switch offers a SP3T circuit, and uniquely performs a latching function in the left and center position, and a momentary function in the right position.

This surface mount right angle slide switch offers a SP3T circuit, with a 1.5mm travel to any position, a compact 2.6mm x 9.7mm package design, with a 1.4mm profile height off the pcb.

Compact SPDT slide switch with surface mount and through hole PC board design and right angle implementation options.

This 5-position navigation switch is surface mounted, and functions as a 4-way directional, center select, rated at 50mA 12VDC, 200,000 cycle life, -40°C to 85°C operating temperature, measuring 9.8mm x 9.8mm, with a low profile of 1.55mm.

These 5-position navigation switches are surface mounted, and function as 4-way directional, center select, rated at 50mA 12VDC, 100,000 cycle life, -40°C to 85°C operating temperature, measuring 7.4mm x 7.7mm, with four actuator heights to choose from, and gull wing or J lead termination.

This 5-position navigation switch is surface mounted, and functions as 4-way directional, center select, rated at 20mA 15VDC, 100,000 cycle life, -20°C to 70°C operating temperature, measuring 12.4mm x 12.4mm, with 12.2mm actuator height, and gull wing termination.

These low profile, piano DIP switches are offered in through hole right angle (splayed) or surface mount right angle (gull wing) design, 2,4, 6, 8, or 10 positions, extended actuator, full pitch, and gold contacts.

These low profile, slide DIP switches are offered in through hole (splayed or straight pin), or surface mount (gull wing) design, 1 to 12 positions, extended or recessed actuator, tape seal option, full pitch, and gold contacts.

These low profile, slide DIP switches are offered in surface mount (gull wing) design, 1, 2, 4, 8, or 10 positions, extended or recessed actuator, tape seal option, full pitch, gold contacts, and a high operating temperature up to 105°C

These low profile, slide, half pitch DIP switches are offered in surface mount (gull wing) design, 2, 4, 6, 8, or 10 positions, recessed actuator, tape seal option, half pitch, and gold contacts.

These piano DIP switches are offered in through hole right angle (straight pin) design, 2 to 12 positions, extended or recessed actuator, tape seal option, full pitch, and gold contacts.

These slide DIP switches are offered in through hole vertical or right angle design, 1 to 12 positions, extended or recessed actuator, tape seal option, full pitch, and gold contacts.

These rotary switches offer panel mount or panel mount through hole mounting, 1 to 4 poles, 1 to 12 positions, a no stop option, BBM or MBB, a flat, round or slotted actuator, and silver or gold flash contacts.

This through hole rotary switch offers SP9T - single pole circuit, with 9 positions – a shaft actuator 9.8mm high off the pcb, 0.100” (2.54mm) full pitch, and silver contacts.

These standard-sized, snap action switches offer up to 1 million life cycles and have multiple actuator and termination options.

These recessed magnetic or reed type switches come in a two-piece design, one piece containing the magnet and the other containing the reed switch. Two contact gap options, and (2) 18 inch 22AWG wire leads.

Choose between a single pole, single throw (SPST) momentary pushbutton switch or a single pole, double throw (SPDT), double action switch, which actuates mid-travel, and then again at full travel.

Affordable, low power right angle pushbutton switch with a double pole, single throw (DPST) circuit and either momentary or latching functionality.

Anti-vandal pushbutton that fits a 16mm panel cutout size and is rated IP67, offering multiple function options and actuator colors.

These single pole push pull pushbutton detector switches are UL approved up to 16A and 1HP, fit a panel cutout size of 28.4mm x 13.5mm, offer multiple actuator options, quick connect termination options of vertical, horizontal, or angled, and silver contacts.

These double pole push pull pushbutton detector switches are UL approved up to 16A and 1HP, fit a panel cutout size of 36.5mm x 13.5mm, offer multiple actuator options, quick connect termination options of vertical, horizontal, or angled, and silver contacts.

Water resistant, sealed anti-vandal switch featuring long life and custom laser engraved marking options. It has a panel cutout size of 19mm (8mm max. depth) and is sealed to an IP65 rating.

Illuminated anti-vandal switch rated IP65 for dust and moisture protection and has a mechanical life of a million cycles. It fits a panel cutout 40mm in diameter with a maximum depth of 5mm.

Dust and water resistant to IP65, this anti-vandal switch has a long life expectancy and a panel cutout size of 16mm (6mm max. depth). It offers an Off-(On) configuration and your choice of domed, flat, or high actuator options.

These anti-vandal switches have dot and ring illumination options, 1- or 2-pole circuits performing momentary functions and are available with either IP40 (non-water resistant) or IP67 (water resistant) ratings. They fit in a panel cutout sized 16mm, with a maximum depth of 8mm.

This switch offers dot and ring illumination options, 1 or 2 poles for performing maintained and momentary functions and double break functions, with an IP65 rating for dust and water resistance. It is meant for a panel cutout sized 19mm, with a maximum depth of 11mm.

These long life anti-vandal switches have solder lug or screw terminal options, and are 1-pole, momentary switches with an IP65 rating for protection against dust and moisture. They fit in a panel cutout sized 12mm with a maximum depth of 5mm.

These anti-vandal switches have an IP65 rating for protection against dust and moisture, dot and ring illumination options, and have solder lug or wire lead terminal options. They are meant for a panel cutout 16mm in size with a maximum depth of 10mm.

These pushbutton switches have a 22mm diameter panel cutout, dot and ring illumination options, 1-pole, double break function and are IP65 rated.

These switches are meant for a panel cutout 25mm in diameter, feature dot and ring illumination, 1 or 2 poles, maintained and momentary, double-break functions, and are IP65 rated.

Anti-vandal switch offering a 28mm diameter cutout size with an IP66 rating for dust and moisture protection and dot or ring illumination.

Anti-vandal switch providing ring illumination with multiple LED color options. It is IP65 rated and performs momentary or latching functions. This switch is meant for a panel cutout sized 16mm in diameter with a maximum depth of 8mm.

Illuminated anti-vandal switch offering a long life expectancy, dust and water resistance to an IP67 rating, and ring or power symbol illumination. It fits a panel cutout sized 16mm in diameter with a max depth of 6-8mm.

Anti-vandal switch with an IP67 rating, 16mm panel cutout, momentary or latching functions and multiple LED color options for ring or power symbol illumination.

High-current anti-vandal switch rated for 20A, 250VAC and 25A, 30VDC. It fits a 19mm diameter panel cutout, has an IP67 rating and features multiple LED options.

The PVP Series anti-vandal switch socket offers quick, efficient termination. It is available with solder lugs or can be direct wired. The PVP socket with solder lugs is for anti-vandal series PV3, PV4, PV7. Direct wired sockets are available for anti-vandal series PV3, PV4, PV7, PV8, PV9, PV10 and PVB3.

This switch offers ring illumination, single-pole or double-pole circuits, stainless steel housing material, and many LED illumination options, including RGB. It is meant for a panel cutout 22mm in diameter.

This switch offers a 19mm diameter panel cutout, dot and ring illumination options, crisp tactile response, momentary functionality with an IP65 rating.

The R1966 Series illuminated rocker switches are available with a variety of colored housings, actuators, and LEDs. The panel cutout is an industry standard 13mm x 19.2mm. UL Listed with a 15-amp electrical rating.

Illuminated rocker switches with a variety of colored housings, actuators and LEDs. The panel cut out is an industry standard size of 13mm x 19.2mm. Full illumination options; UL listed with an electrical rating of 9 amps.

These slim power rocker switches have single-pole circuits and perform maintained functions. They are just 6.65mm x 19.2mm and come in a slim-line package design.

This sealed rocker switch is IP67 rated & UL listed. LED illumination options, custom actuator markings available, and an ergonomic actuator design. Fits in panel cutout 21.1mm x 37mm.

The RA8 Series power rocker switch has a high electrical rating of up to 16 amps. The RA8 offers full or signal light illumination with multiple LED lens colors and an optional cap for protection from dust and moisture at an IP54 rating. It fits a panel cutout 13mm x 19mm in size.

The RB1 Series power rocker switch has a high electrical rating of up to 20 amps and features multiple terminal, actuator, and illumination options, plus an optional cap for dust and moisture protection at an IP54 rating. It fits a panel cutout sized 11mm x 30mm.

The RB2 Series illuminated, power rocker switch is electrically rated for 20 amps and has an optional cap for dust and water protection at an IP54 rating. Dot, full, signal light, or non-illumination options are available for this switch meant for a 22mm x 30mm panel cutout.

The RB5 Series rocker switch is sealed to an IP67 rating, requires a 22mm x 30.2mm cutout and has electrical ratings ranging from 16 to 25 amps, along with the required agency approvals.

The RBW2 Series illuminated rocker switch is sealed to IP66 ratings without requiring a rubber boot. UL approved to 1/3 HP and [cURus] approved for up to 16 amps. Fits panel cutout sized 22mm x 30mm.

The RD1 Series compact, power rocker switch is a small rocker switch with high electrical ratings. It is ideal for applications with limited space. Rated for up to 16A and 1/3HP, this switch fits a panel cutout 6.8mm x 19.2mm in size.

This panel mount switch is a SPST, momentary pushbutton with a long life expectancy and is sealed at an IP65 rating. It is an illuminated pushbutton with multiple LED and cap color options.

Square, momentary pushbuttons sealed to an IP65 rating with a die cast housing and nylon actuator. This illuminated pushbutton comes in many colors.

This pushbutton switch has a 13.6mm diameter panel cutout and is an SPST momentary (500,000 life cycles) switch. It is IP65 sealed, and has a nylon housing & actuator.

Square, sealed pushbutton switches are protected from moisture at an IP67 rating and have a mechanical life expectancy of 100,000 cycles.

Illuminated, power rocker switch has a bi-color actuator and four sizes to cover many popular cutouts. High electric current capacity of up to 20 amps and 1/4 HP rating.

High current rocker switch features an internal dust and water protection seal rated IP54. Glossy finish and multiple marking options and switch functions are available. Fits a panel cutout sized 21 x 36.8mm.

Anti-vandal switch that offers multiple illumination options and is sealed to an IP67 rating. It fits a 25mm round panel cutout.

The ST1 Series power toggle switches fit a 12mm diameter panel cutout, and have an electrical rating of up to 20A, UL certified, offering a single pole circuit with 2 or 3 positions, five termination options, two bushing options, and a standard or short bat actuator

The ST2 Series power toggle switches fit a 12mm diameter panel cutout, and have an electrical rating of up to 20A, UL certified, offering a double pole circuit with 2 or 3 positions, five termination options, and two bushing options

The ST3 Series power toggle switches fit a 12mm diameter panel cutout, and have an electrical rating of up to 24A, UL certified, offering a three pole circuit with 2 or 3 positions, and five termination options.

The ST4 Series sealed toggle switches fit a 12mm diameter panel cutout, and are rated IP68, offering a single pole or double pole circuit with 2 or 3 positions, four termination options, three electrical rating options, UL certified, and a 17mm metal bat or 22mm plastic bat actuator.

The ST5 Series high temperature toggle switches fit a 12mm diameter panel cutout, and can handle temperatures up to 125°C, offering a single pole or double pole circuits with 2 or 3 positions, four termination options, three electrical rating options, UL certified, and a 17mm metal bat or 22mm plastic bat actuator.

Made from stainless steel and rated IP67 for dust and moisture protection. The switch also boasts a mechanical life of a million cycles and an electrical life of 200,000 cycles. It fits a round panel cutout 19mm in size.

Short body anti-vandal switch rated IP67 for protection against dust and moisture. It has a 22mm diameter panel cutout size. This illuminated switch is available with solder terminals or wire leads.

An IP67 rated, short body, illuminated anti-vandal switch. It is meant for a 25mm panel cutout, making it the largest of the SV Series switches.

This sealed, through hole detector switch is sealed to IP67, measures 8.2mm x 5.25mm, and has a pin plunger actuator, requiring 35gf to electrical make, and 100gf to full stroke.

These ultraminiature surface mount detector switches measure 3.5mm x 3mm, with a 2.53mm profile, are rated 1mA 5VDC, and come with a guiding post, a mounting boss option, overtravel, and silver contacts.

These miniature surface mount right angle tactile switches measure 4.7mm x 3.5mm, with 4.5mm actuator, 1.65mm height off the pcb, a mounting boss option, 160gf or 220gf operating force, and silver contacts.

These miniature, low profile, surface mount tactile switch measure 3.7mm x 3.7mm with an ultra-low profile of 0.35mm, 160gf or 235gf operating force, and silver contacts.

This SMT edge mount right angle tactile switch measures 2.0mm x 2.8mm, with a 0.65mm height, 160gf operating force, and has silver contacts.

These sealed, surface mount tactile switches measure 4.6mm x 2.8mm and are sealed to IP67, offering multiple actuator heights and operating forces, with silver contacts.

Subminiature snap action switch comes with a vertical, left angle or right angle PCB pin termination in two different lengths.

This anti-vandal switch with UL certification is rated to 3 amps with various illumination options, IP67 protection from dust and moisture, and a mechanical life of up to one million cycles. It fits a panel cutout 19mm in diameter with a maximum depth of 10mm.

Tamper resistant switch that is UL Listed and IP67 rated for dust and moisture protection. It fits a 22mm round panel cutout with a maximum depth of 10mm.

UL certified anti-vandal switch rated IP67 for dust and moisture protection. It fits a panel cutout 25mm in diameter with a maximum depth of 10mm.

High current rocker switch with an internal dust and water protection seal rated IP55. It handles up to 20 amps and comes with 2-pole circuits for performing various functions. It fits a panel cutout sized 22 x 30mm.

This snap action switch is sealed to an IP67 rating for dust and moisture and offers multiple termination options, including wire leads.

A panel mount snap action switch sealed to an IP67 rating for dust and moisture protection with SPDT On-(On) function, multiple electrical ratings, pin plunger actuator and solder lug or 162mm long wire lead termination.

Snap action switch rated IP67 for dust and moisture protection, handles up to 2 amps, has a long life expectancy and comes with multiple terminal options.