security

The CS Series illuminated, anti-vandal switch provides capacitive switch technology, also known as a touch sensor, and can perform momentary or latching functions. It is meant for panel cutouts sized 19mm or 22mm.

These keylock switches provide a variety of size and product package options for your application. You can choose between barrel or flat key options, key code options, and more. Dozens of types and sizes of keylock switches are available.

The LB22 Series is a pushbutton available with or without illumination and sealed at an IP65 ingress protection rating. Single- or double-pole functions and latching or momentary options are available, as are multiple colors and illumination voltage.

The MR1000 Series is a recessed magnetic or reed type switch which comes in a two-piece design. One piece contains the magnet and the other piece contains the reed switch.

The PA4 Series pushbutton has high power ratings, offers both standard and water resistant versions, and features full illumination options with multiple lens colors.

Affordable, low power right angle pushbutton switch with a double pole, single throw (DPST) circuit and either momentary or latching functionality.

The PB66 Series pushbutton switch is rated IP66 for dust and moisture protection, features a 50,000-cycle electrical life expectancy, and comes illuminated or non-illuminated.

Our PMV6 Series anti-vandal pushbutton switches come with your choice of multiple function options and cap colors. This IP67-rated switch offers a 10,000-cycle electrical life, an operating temperature range of -20°C to 65°C, and fits a panel cutout sized 16mm.

These are detector or door interlock switches and are available as push-pull or momentary pushbuttons. They have high UL power ratings of 16A.

The PP2 Series pushbutton switch acts as a door interlock or detector switch and is available as a push-pull or momentary pushbutton. It\'s UL power rated.

The PV0 Series anti-vandal switch is rated IP67 for protection against dust and moisture and is illuminated, with multiple color options. It fits a 12mm panel cutout with a maximum depth of 6mm.

The PV1 Series water resistant, sealed, anti-vandal switches feature long life and custom laser engraved marking options. It has a panel cutout size of 19mm (8mm max. depth) and is sealed to IP65 ratings.

The PV10 Series illuminated anti-vandal switch is rated IP65 for dust and moisture protection and has a mechanical life of a million cycles. It fits a panel cutout 40mm in diameter with a maximum depth of 5mm.

Vandal resistant and water resistant to IP65, this anti-vandal switch has a long life expectancy, and a panel cutout size of 16mm (6mm max. depth). It offers an Off-(On) configuration and your choice of domed, flat, or high actuator options.

These anti-vandal switches have dot and ring illumination options, 1- or 2-pole circuits performing momentary functions, and are available with either IP40 (non-water resistant) or IP67 (water resistant) ingress protection ratings. They fit in a panel cutout sized 16mm, with a maximum depth of 8mm.

This switch offers dot and ring illumination options, 1 or 2 poles for performing maintained and momentary functions and double break functions, with an IP65 rating for dust and water resistance. It is meant for a panel cutout sized 19mm, with a maximum depth of 11mm.

These long life anti-vandal switches have solder lug or screw terminal options, and are 1-pole, momentary switches with an IP65 rating for protection against dust and moisture. They fit in a panel cutout sized 12mm with a maximum depth of 5mm.

These long life anti-vandal switches have an IP65 rating for protection against dust and moisture, dot and ring illumination options, and have solder lug or wire lead terminal options. They are meant for a panel cutout 16mm in size with a maximum depth of 10mm.

These pushbutton switches have a 22mm diameter panel cutout, dot and ring illumination options, 1-pole, double break function and are IP65 rated.

These switches are meant for a panel cutout 25mm in diameter, feature dot and ring illumination, 1 or 2 poles, maintained and momentary, double-break functions, and are IP65 rated.

The PV9 Series anti-vandal switch offers a 28mm diameter cutout size with an IP66 rating for dust and moisture protection, and dot or ring illumination.

The PVA3 Series anti-vandal switch provides ring illumination with multiple LED color options. It is IP65 rated and performs momentary or latching functions. This switch is meant for a panel cutout sized 16mm in diameter with a maximum depth of 8mm.

The PVA6 Series illuminated anti-vandal switch offers a long life expectancy, dust and water resistance to an IP67 rating, and ring or power symbol illumination. It fits a panel cutout sized 16mm in diameter with a maximum depth of 6-8mm.

The PVK4 Series is an anti-vandal switch rated IP65 for dust and moisture protection with a keylock option rated IP40. Multiple illumination colors and voltages are also available.

IP67 sealed lamp indicator switch with multiple panel cutout sizes ranging from 6mm to 19mm in diameter.

The PVP Series anti-vandal switch socket offers quick, efficient termination. It is available with solder lugs or can be direct wired. The PVP socket with solder lugs is for anti-vandal series PV3, PV4, PV7. Direct wired sockets are available for anti-vandal series PV3, PV4, PV7, PV8, PV9, and PV10.

This switch offers ring illumination, single-pole or double-pole circuits, stainless steel housing material, and many LED illumination options, including RGB. It is meant for a panel cutout 22mm in diameter.

This switch offers a 19mm diameter panel cutout, dot and ring illumination options, crisp tactile response, momentary functionality with an IP65 rating.

The PZ Series is an anti-vandal, panel mount, piezo switch with momentary pulse functionality and 50 million cycles of electrical life. The PZ series is offered as non-illuminated or ring pattern illumination with LED RGB.

The RB2 Series illuminated, power rocker switch is electrically rated for 20 amps and has an optional cap for dust and water protection at an IP54 rating. Dot, full, signal light, or non-illumination options are available for this switch meant for a 22mm by 30mm panel cutout.

The SAV4 Series anti-vandal switch comes pre-mounted on a snap action switch, utilizing the LS snap action with a 15A electrical rating. It fits a panel cutout sized 19mm in diameter.

The SAV7 Series anti-vandal switch has an electrical rating of 15A, 125/250VAC and is protected from dust and moisture at an IP67 rating. It fits panel cutouts sized 22mm in diameter.

The SAV8 Series anti-vandal switch offers multiple illumination options and is sealed to an IP67 rating. It fits a 25mm round panel cutout.

The ST4 Series sealed toggle switches are rated IP68 for dust and moisture protection and offer single pole or double pole circuit functions with 2 or 3 actuator positions. Select from 10 different function options, three electrical rating options, and 17mm metal or 22mm plastic bat actuator.

The ST5 series toggle switch series can handle temperatures ranging from -10°C to 125°C. The ST5 offers a single pole or double pole circuit function with two or three positions and offers three electrical rating options.

The SV4 Series is made from stainless steel and is rated IP67 for dust and moisture protection. The switch also boasts a mechanical life of a million cycles and an electrical life of 200,000 cycles. It fits a round panel cutout 19mm in size.

The SV7 Series is a short body anti-vandal switch rated IP67 for protection against dust and moisture. It has a 22mm diameter panel cutout size. This illuminated switch is available with solder terminals or wire leads.

The SV8 Series is an IP67 rated, short body, illuminated anti-vandal switch. It is meant for a 25mm panel cutout, making it the largest of the SV Series switches.

The TD1150 is a thru hole PCB mounted detector switch. It is IP65 rated for dust and moisture protection and provides full travel around 2.5mm with the electrical make around .5mm’s. Actuation force to the electrical make is only 35 grams.

The TD1250 Series detector switches feature a 500,000-cycle mechanical life at minimum and are rated IP67 for dust and moisture protection. They come with mounting bosses and have three actuator options.

The TL1275 Series panel mount, tactile switches include 500mm long wire leads with connectors. This tact switch is 19mm diameter and provides a sharp tactile response and LED illumination options.

The TL3301 Series is a 6mm x 6mm SMT tact switch. Designed for SMT applications, the TL3301 offers several actuator heights, multiple operating force, gold or silver plated contacts.

The TL3315 Series tactile switches feature an ultra low profile (0.55mm) and are surface mountable, making it a great tact switch for applications that require a tight fit.

The TL3342 Series low profile, SMT tactile switch has two operating force options. Its low profile is a mere 1.50mm high.

The TL6100 Series tactile switch offers multiple actuator heights and a long operating life of up to one million cycles. These tactile switches are process sealed and offers the following operating force options: 130gf, 160gf, 300gf, or 500gf.

The TL6120 series tact switch offers a long operating life of up to 1 million cycles and offers multiple actuator heights. This surface mount switch is process sealed.

Sub-miniature illuminated thru-hole tact switch that is water washable, provides 350 gram actuation force and 100,000 life cycle rate.

The TL6300 Series PCB mount, high-temperature tactile switch offers a 10,000,000 cycle life expectancy.

The TL6700 Series is a sealed, SMT tactile switch. It features an improved seal design and protects against more aggressive wash processes.

With a 1,000,000 life cycle expectancy, the switch is environmentally friendly and contains no mercury. This tilt switch is triggered when it is tilted 45 degrees of the horizontal.

The TS Series subminiature, snap action switch comes with a vertical, left angle, or right angle PCB pin termination in two different lengths.

The ULV7 Series is a tamper resistant switch that is UL Listed and IP67 rated for dust and moisture protection. It fits a 22mm round panel cutout with a maximum depth of 10mm.

The ULV8 Series anti-vandal switch is UL certified and rated IP67 for dust and moisture protection. It fits a panel cutout 25mm in diameter with a maximum depth of 10mm.