Agency Certification List

Some configurations of the following series products are UL certified:

Investigated to ANSI/UL 61058-1 and ANSI/UL 1054:

1. WOYR2.E121922 – UL61058-1 & UL1054
2. WOYR2.E194579 – UL61058-1 & UL1054

Investigated to ANSI/UL 508:

1. NKCR2.E504759 – UL508
2. NLRV2.E366078 – UL508
3. NRNT2.E195908 – UL508

Some configurations of the following series products are CSA certified:

Investigated to CAN/CSA-C22.2 No. 61058-1 and CSA-C22.2 No. 55:

1. WOYR8.E121922
2. WOYR8.E194579

Investigated to CAN/CSA C22.2 No. 14-13:

1. NKCR8.E504759

Investigated to CAN/CSA C22.2 No. 14-10:

1. NLRV8.E366078
2. NRNT8.E195908

Some configurations of the following series products are Intertek certified:

• PR
• RA1
• RA4

Not all product configurations in these series are Intertek certified. To verify if the product configuration you’re interested in is Intertek certified, do one of the following:

1. Review certification at this Intertek link
2. Review with E-Switch Product Compliance Engineer

Some configurations of the following series products are VDE certified:

• E200
• LS
• MS
• PB1973
• R1966
• R1973
• R4
• R5
• R6
• RBW2

Not all product configurations in these series are VDE certified. To verify if the product configuration you’re interested in is VDE certified, do one of the following:

1. Review certification at this VDE link
2. Review with E-Switch Product Compliance Engineer

Investigated to EN 61058-1:

This is the international standard for switch components for low-voltage (below 480V) appliances. The certificate affirms the use for the European Economic Community. This will receive a “TUV” and/or “ENEC” mark.

Some configurations of the following series products are TUV certified:

• HY106
• KJE32
• PP1
• PP2
• WB2

Not all product configurations in these series are TUV certified. To verify if the product configuration you’re interested in is TUV certified, do one of the following:

• Review certification at this TUV link
• Review with E-Switch Product Compliance Engineer

RoHS certificates can be obtained in the following ways:

1. Click the RoHS icon on any Product Series Page;

2. Contact E-Switch Customer Service Representative or Sales Department;

3. E-Switch Live Chat on the website.

E-Switch REACH Position

Per the REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) EU Chemicals Legislation, producers or importers of articles may or may not have to register these articles. An article is defined as an object whose shape, surface and design are more relevant than the chemical composition of the object. Electromechanical switches therefore are “articles”, and as such fall under the scope pertaining to said articles in the requirements for possible chemical registration. (See https://echa.europa.eu/reach_en.asp)
Since the articles (switches) are neither “intended to release substances above 1 ton/article”, or contain any of the SVHC substances (Substances of Very High Concern) >0.1% weight/weight, no registration or further action is required by E-Switch. (See published “Guidance For Articles”, used to determine registration requirements, here: https://echa.europa.eu/candidate-list-table )
E-Switch will continue to monitor the legislation and updated SVHC list, and will update our position as required to meet the current regulations.

REACH certificates can be obtained in the following ways:

1. Click the REACH icon on any Product Series Page;

2. Contact E-Switch Customer Service Representative or Sales Department;

3. E-Switch Live Chat on the website.

You can read E-Switch’s Conflict Minerals Statement below:

Conflict Minerals Statement (.XLXS file download)