ST2 Series Power Toggle Switches

The ST2 series toggle switches have a heavy duty rating with UL approvals, and a rubber boot for water and dust protection. Tab, screw, solder and wire lead terminal options. This toggle switch is rated up to 20A. Power rated toggle switch Toggle

The ST2 series toggle switches have a heavy duty rating with UL approvals and a rubber boot for water and dust protection. The terminal options are tab, screw, solder, and wire lead. This toggle switch is rated up to 20A.

E-Switch now offers our ST Toggle Series switches prewired as an off-the-shelf item. This eliminates the need to add wires on your end, saving you time and money. Check out our video to learn more.

CERTIFICATIONS (click the logo below)

Other toggle switches
Other panel mount switches
Other power rated switches

Step 1

Configure your part number by selecting from the columns below.

PART NUMBER:

Clear

Step 2

When your part number is complete, click to view additional options.

Additional Options

Most Common Parts

Series

ST2

Terminal

1

4.8mm Tabs
2

Solder
4

6.3mm Tabs
6

Screw
W

Wire Leads 500mm long

Function

2

2 Pole
Off-On
G

2 Pole
On-On
E

2 Pole
Off-(On)
6

2 Pole
On-Off-On
J

2 Pole
On-Off-(On)
K

2 Pole
(On)- Off- (On)

Rating

D

20A 125VAC

Actuator Type

0

Standard Bat

Bushing Type

0

M12x1.0
2

15/32"- 32UNS

SPECIFICATIONS
RATING:
Maintained Switches:
      20A 125VAC [cULus]
      15A 277VAC [cULus]
      2HP 125-277VAC [cULus]

Momentary Switches:
      20A 125VAC [cULus]
      15A 277VAC [cULus]
      1.5HP 125-277VAC [cULus]

OPERATING TEMPERATURE: 0°C to 85°C
STORAGE TEMPERATURE: -20°C to 85°C
ELECTRICAL LIFE: 6,000 Cycles
CONTACT RESISTANCE: 50mΩ Max.
INSULATION RESISTANCE: 2MΩ Min. at 500VDC for 1 minute
DIELECTRIC STRENGTH: 1,000VAC for 1 Minute