KAS Series Slide DIP Switches

These slide DIP switches offer up to 12 positions, with vertical or right angle PC Pin termination, Tape sealing available, recessed or extended actuators. Slide DIP Switches DIP

The KAS series slide DIP switches are available with PC pin or right angle PC pin termination. Available in up to 12 positions, these DIP switches come with tape seal options and are great for controller applications, along with telecommunications and test and instrumentation.

PLEASE NOTE: The right angle PC Pin termination option is not available with the recessed actuator. It is only available with the extended actuator.

CERTIFICATIONS (click the logo below)

Other dip switches
Other right angle switches
Other sealed switches

Step 1

Configure your part number by selecting from the columns below.

PART NUMBER:

Clear

Step 2

When your part number is complete, click to view additional options.

Additional Options

Most Common Parts

Series

Model No.

S

Slide Type

Termination

1

PC Pin
2

Rt. Angle PC Pin (Extended Actuator Only)

Circuit

1

SPST

No. of Positions

02

2-Positions
03

3-Positions
04

4-Positions
05

5-Positions
06

6-Positions
07

7-Positions
08

8-Positions
09

9-Positions
10

10-Positions
12

12-Positions

Actuator

R

Recessed Actuator
E

Extended Actuator

Seal

None

Standard Unsealed
T

Top Tape Sealed

SPECIFICATIONS
CONTACT RATING: Switch: 25mA 24VDC
                               Carry: 100mA 50VDC
OPERATING LIFE: 2,000 Make-and-Break Cycles, Each Circuit
CONTACT RESISTANCE:
                  Initial: 50mΩ Typical at 2-4VDC at 100mA
                  After Life: 100mΩ Typical at 2-4VDC at 100mA
INSULATION RESISTANCE: 100MΩ Min. at 500VDC
OPERATING FORCE: 1000gf Max.
DIELECTRIC STRENGTH: 500V RMS Min. at Sea Level Between Adjacent Terminals
TRAVEL, ACTUATOR: 2.00mm Typical
TEMPERATURE RANGE: Operating/Storage: -40°C to 85°C
VIBRATION: To MIL-STD-202F, Method 201 A
SHOCK: To MIL-STD-202F, Method 213B, Condition A
CAPACITANCE: 5pf Max. Between Adjacent Terminals

SWITCH FUNCTION: SPST, 1 Thru 12 Positions (Except Position 11)

SOLDERING RECOMMENDATION
               Wave: 500°F (260°C) for 5s Max.
               Hand: 30W Soldering Iron at 608°F (320°C) for 2s Typical
               Keep all switches in the "OFF" position during soldering and cleaning
               process.